Biomedical Equipment Technician (BMET) Certification Practice Exam

These questions are part of the practice quiz. Start practicing

• Why is inventory control significant for medical equipment?
• What does the term "life cycle cost" mean in the context of medical equipment?
• What is a potential consequence of using unapproved biomedical equipment?
• What is the benefit of an expedited repair process in medical equipment management?
• The unit of inductance is the:
• In electrical safety testing, which test evaluates insulation resistance?
• What are the lower chambers of the heart called?
• What does "end-of-life" indicate about medical equipment?
• Why is proper training important for Biomedical Equipment Technicians (BMETs)?
• Source gas supplied to ventilators is not comfortable for patients to inhale unless it is:
• What could potentially cause hazardous leakage currents in biomedical equipment?
• Why are x-rays considered hazardous?
• When should a sink test be performed on an ECG input?
• Why is proper documentation important in equipment maintenance?
• What are test leads used for in biomedical equipment?
• The percentage of an external current flowing in the body from arm to arm that will pass through the myocardium is about:
• Which aspect of equipment maintenance does documentation primarily affect?
• Which of the following locations should not allow cellular phones?
• Which of the following is a characteristic of macroshock?
• Which techniques are primarily used for signal isolation circuits in ECG inputs?
• What does an AC receptacle powered from an isolated power system indicate?
• What does NFPA stand for?
• What is the function of telemetry in medical devices?
• What does clinical engineering involve?
• What is the fundamental difference between codes and standards?
• When is the red light outside an x-ray room on?
• The effectiveness of a medical equipment maintenance program can be evaluated by which factor?
• Which of the following is a key concern regarding wireless medical devices?
• What is the major hazard to the body from scattered or reflected laser radiation?
• What does preventative maintenance entail for medical devices?
• An isolation transformer is a transformer with:
• What are the three components of an ordinary fire?
• In what two ways can electrical currents flowing through the body affect tissues?
• What is the purpose of a three-prong AC power plug when using portable medical equipment?
• What is the most common paper speed used for an ECG?
• Where should Ground Fault Circuit Interrupters (GFCIs) be used in hospitals?
• What can improper training lead to for BMETs?
• If the internal resistance of the human body is taken to be 500 ohms, how much current could be made to flow through the body from an ordinary 120 volt AC power supply?
• What is the primary role of a Biomedical Equipment Technician (BMET)?
• What is a common method of avoiding electrical hazards when servicing medical equipment?
• When transporting neonates, what is the most important environmental parameter to maintain?
• When dealing with electrical safety, which of the following is NOT a common risk factor?
• What color should an oxygen cylinder be painted?
• What does the term "microshock" refer to?
• After being sterilized, devices from an ETO sterilizer must be aerated for how long?
• What is an infusion pump used for in healthcare?
• Who compiles the GMP requirements for medical equipment?
• What should a BMET do if equipment does not pass safety testing?
• The inductance of a coil is determined primarily by:
• What is the function of a pulse oximeter?
• The human body's "can't let go" reaction to 60Hz current begins at approximately what current?
• How can maintenance documentation improve equipment reliability?
• What organization is known for setting healthcare standards in the US?
• What is a primary function of telemetry in monitoring systems?
• What does the calibration process primarily ensure in medical devices?
• What is the body's first line of defense against electric shock?
• What type of radiation do film badges in imaging areas monitor?
• What is the role of the Joint Commission regarding medical equipment?
• What is the safe "direct to the heart" current level?
• Which test is commonly utilized to evaluate the performance of imaging equipment?
• What color should a nitrous oxide gas cylinder be painted?
• When calibrating a medical device, what should be checked first?
• What does FDA stand for in the context of biomedical equipment?
• In which scenario is EMI notably a concern in healthcare?
• What is the function of a defibrillator?
• What does the acronym “BMET” stand for?
• In comparing the pressures within the heart, how does the right atrium pressure compare to the left atrium pressure?
• What type of maintenance is emphasized for ensuring medical equipment safety?
• Which method is commonly employed to test electrical safety in medical devices?
• What is the primary cause of fires in hospitals?
• A "flat" EEG, that is, one without waves, could indicate what condition?
• How does wireless technology impact medical devices?
• What does "down-time" refer to regarding medical equipment?
• According to JCAHO standards, how often must equipment in hospitals be tested?
• In troubleshooting equipment, what is the first step a technician should take?
• What is the role of a service manual in equipment maintenance?
• A common cause of ECG artifact is:
• Which statement regarding electrical current is true?
• What is the primary focus of safety protocols when working in a hospital setting?
• What is the purpose of User Acceptance Testing (UAT) in relation to biomedical devices?
• What type of leakage test should be performed on a patient monitor in a hospital?
• According to the Life Safety Code, what should the emergency power system provide during a power failure?
• What is the primary role of a Biomedical Equipment Technology program?
• At what pressure does a steam sterilizer operate at 270 degrees Fahrenheit?
• What is the purpose of software validation in the medical device sector?
• How does a service-oriented architecture (SOA) benefit healthcare IT systems?
• What should a BMET do if a device has injured a patient?
• When testing solid state electrosurgical units, what is the best test load to use?
• What role does documentation play in audits related to medical equipment?
• Who is primarily responsible for maintaining accurate equipment documentation?
• How are outlets for emergency power designated according to the Life Safety Code?
• What does the abbreviation PM stand for in Biomedical Equipment Management?
• What is the purpose of sterilization in biomedical equipment maintenance?
• Is maintenance documentation only relevant for compliance with regulations?
• Which of the following best describes invasive monitoring devices?
• What is the main benefit of maintaining service agreements for medical equipment?
• Which of the following is a consequence of inadequate maintenance documentation?
• What organization establishes the basic rules and provisions for the safe use of electricity in hospitals?
• What is the standard color coding for 115 VAC ground, neutral, and hot wires?
• What is ventricular fibrillation?
• What is the function of a hospital GFCI?
• What is the primary electrical safety problem present in modern hospitals?
• What technology is used for imaging inside the body without surgery?
• What is the main purpose of biomedical equipment validation?
• What can be a consequence of improper calibration in biomedical equipment?
• How is macroshock best defined in the context of biomedical equipment?
• Which term is used to describe the ability of equipment to perform a specific function correctly?
• What does the term "intrinsically safe" refer to in biomedical equipment?
• Where does the majority of heating occur on the dispersive electrode during an electro-surgical procedure?
• What component is essential for the safe operation of medical electrical equipment?
• In making an ECG, lead II configuration compares the potential difference between lead connections:
• What is a primary benefit of maintaining a historical record of equipment performance?
• What primary function does an anesthesia machine serve during surgical procedures?
• What is the recommended interval for testing rental equipment according to standard safety protocols?
• What does a "UL" label on an instrument's power cord signify?
• What measurement unit is commonly used for the frequency of an electrical signal?
• Why should mercury thermometers not be used in infant incubators?
• What is the typical leakage current in a power cord per foot?
• Describe the term "biomedical signal."
• What does CAPA stand for in biomedical equipment management?
• What should be included in the maintenance documentation to maximize its effectiveness?
• What is the typical range of human body resistance?
• What two basic electrical safety tests should be performed on line powered equipment?
• What are potential hazards associated with laser surgical equipment?
• How does thorough documentation impact regulatory compliance?
• What basic electrical characteristic usually causes leakage currents in modern medical equipment?
• Which of the following is a type of critical care equipment?
• Which items are considered critical care equipment?
• Why must BMETs have a solid understanding of human anatomy and physiology?
• What basic dangers must be considered when dealing with electrical safety?
• What is the standard color code for 115 volt AC electrical service wiring for the hot, neutral, and ground wires, respectively?
• In a medical technology context, what does "asset management" entail?
• What is the significance of ISO 13485 in the medical device industry?
• In preparing a cord for a hospital grade plug, what should be done with the green lead?
• What function does a ventilator serve in medical settings?
• Power lockouts are necessary for which of the following situations?
• What is the purpose of the IEC 60601 standard?
• Which of the following is a primary responsibility of a BMET?
• What is the approximate current level known to cause ventricular fibrillation in adult humans with epicardial contact?
• What does total lung capacity consist of?
• What is the primary function of a ground fault interrupter?
• What specific type of information should be documented after maintaining equipment?
• According to the Life Safety Code, what is the minimum required retention force for the grounding contact of power receptacles in patient care areas?
• What is the primary benefit of proper grounding in medical equipment?
• Which component is critical in the assessment of fire hazards in hospitals?
• When should a BMET report equipment failure?
• A device to change one form of energy into another form of energy is called a:
• How are child safe power outlets identified?
• Which type of medical device is specifically intended for treatment?
• What is the consequence of ignoring proper sterilization procedures for medical devices?
• Effective documentation can help avoid which of the following?
• What differentiates a diagnostic device from a therapeutic device?
• What ensures the continuity of biomedical equipment grounding?
• In what frequency range does High Definition TV affect biomedical telemetry?
• Two coils are said to have mutual inductance when they are linked by:
• Which anesthetic agent is the most flammable?
• What is the main purpose of the risk management process in healthcare?
• Why is incorporating redundancy necessary in a hospital safety program?
• What is true about electrical leakage current?
• What three basic groups should be considered in an overall hospital safety program?
• When handling mercury, what is crucial to ensure safety?
• What is one of the key reasons for auditing maintenance documentation?
• What is the difference between non-invasive and invasive monitoring devices?
• In the event of a failure of normal power, how quickly must the alternate source be connected to the load in a hospital's essential electrical system?
• How does defibrillation function in cardiac devices?
• Which of these devices is typically used for measuring blood glucose levels?
• In which line should a fuse be placed for safety?
• What is the pressure inside a full oxygen cylinder at room temperature approximately?
• Which method is common for evaluating the usability of biomedical equipment?
• The passage of electrical current into a cell will cause it to do what?
• How often should a BMET perform preventative maintenance on critical devices?
• How does effective inventory control benefit healthcare facilities?
• What is electromagnetic interference (EMI) in medical facilities?
• What is the "threshold of feeling" current level at 60 Hz from hand to hand?
• According to the Life Safety Code, what features should a LIM include?
• What testing protocol must be followed for rental and loaner equipment based on JCAHO standards?
• What outcome does a well-established CAPA process provide?
• Oxygen and nitrous oxide compressed gas cylinders should not be stored:
• Instrumentation amplifiers have which of the following characteristics in common?
• What is typically the cause of death in accidents involving electrocution?
• Which type of protective equipment is crucial for technicians working on high-voltage systems?
• Which organization is primarily responsible for ensuring standards related to medical device safety?
• How are Class I medical devices characterized in terms of risk?
• What is the purpose of a technical service agreement?
• What is a crash cart used for in healthcare?
• What should a power system ground wire be heavy enough to carry?
• The recommended test procedure for detecting electrical hazards in clinical settings is to:
• What is the significance of calibration in biomedical equipment?
• What is the main purpose of the Joint Commission on Accreditation of Healthcare Organizations (JCAHO)?
• Which type of device is used to continuously monitor a patient's heart rate?
• Which type of power supply is most commonly used in portable medical equipment?
• What is the importance of identifying electrical hazards in hospital environments?
• Why is historical equipment performance information valuable?
• A reverse precaution sign on a patient's room indicates that the patient is: